Skip to content
This installation reference covers 2016-2018 Chevrolet Camaro Multicolor DRL Boards. Match the product, vehicle configuration and controller part number before starting.
Part # F13, G20
Chevrolet Camaro Flow Series Multicolor DRL Boards (2016-2018)
Install Guide
Step 1: Test your Product. This helps you check operation and confirm the wiring before permanent installation. See the wiring guide that comes with your product
Step 2: Remove your bumper to access headlights.
Step 3: Open your headlights. We recommend using the cutting method for this particular headlight. (*Confirm the opening and resealing method for your exact housing before following the video below)
Step 4: Install your LED Product into your headlights.
Step 5: Reseal your headlights (see video above) or click here for full guide.
Step 6: If you haven't already, wire your LED Product onto your car using the included wiring guide or Flow Series Bluetooth Controller w/ DRL SmartSwitch - Install Guide
Additional installation videos
These earlier demonstrations may show a different controller revision. Use the current kit-specific wiring instructions above for your supplied hardware.
Source and installation help
Checked against 2016-2018 Chevrolet Camaro Multicolor DRL Boards Install Guide in the RGB Halo Kits Help Center on October 22, 2026. Follow the instructions supplied with your exact kit if hardware versions differ.
Controller and wiring guide · Ask installation support · Browse lighting guides
