Side Emitting DRL Tube Strips Install Guide

Side Emitting DRL Tube Strips Install Guide

Side Emitting DRL Tube Strips Install Guide
Welcome to our comprehensive installation guide for Side Emitting DRL Tube Strips! Elevate the aesthetics and visibility of your vehicle with these innovative DRL tube strips. Our step-by-step instructions ensure a hassle-free installation process, allowing you to customize your vehicle's appearance and enhance safety on the road.

Product Link

Side Emitting Flexible DRL Tube Strips | Multicolor – RGB Halo Kits

Install Guide

Step 1: Test your Product. This ensures no manufacturing defects are in the LEDS, and that you understand how to wire your product properly. See the wiring guide that comes with your product or visit our Wiring Guide (RGBW/ RGBWA and Flow / Color Chasing)

Step 2: Remove your bumper to access headlights. (The process of accessing the headlight may differ depending on the vehicle. This step may or may not be necessary for your specific vehicle. For tailored instructions, you can consult our help center or search the web for vehicle-specific guidance on how to proceed.)

Step 3:  Open your headlights. (*Headlights can be safely opened and resealed using the process outlined in the video below)

Step 4: Install your LED Product into your headlights.

We are currently in the process of creating a video installation guide for this product. In the meantime, if you need any assistance during the installation process, don't hesitate to reach out to us. We're here to help!

Step 5: Reseal your headlights (see video above) or click here for full guide. 

Step 6: If you haven't already, wire your LED Product onto your car using the included wiring guide or see our Wiring Guide.

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.