This installation reference covers 2019-2023 Dodge Ram 1500 Midline Multicolor DRL Boards. Match the product, vehicle configuration and controller part number before starting.
Product Link
2019-2024 RAM 1500 DRL KIT – RGB Halo Kits
Step 1: Test your Product. This helps you check operation and confirm the wiring before permanent installation. See the wiring guide that comes with your product or visit our wiring guide (RGBW/ RGBWA and Flow / Color Chasing).
Step 2: Remove your bumper to access headlights
Step 3: Open your headlights. (*Confirm the opening and resealing method for your exact housing before following the video below)
Step 4: Install your LED Product into your headlights
RGBW VERSION
FLOW VERSION: SIMILAR PROCESS EXCEPT YOU HAVE WILL FLOW LED STRIPS TO STICK BEHIND THE FACTORY DRL TO ILLUMINATE.
Step 5: Reseal your headlights (see video above) or click here for full guide.
Step 6: If you haven't already, wire your LED Product onto your car using the included wiring guide or see our general wiring guide here.
Additional installation videos
These earlier demonstrations may show a different controller revision. Use the current kit-specific wiring instructions above for your supplied hardware.
Source and installation help
Checked against Ram 1500 Midline Multicolor DRL Boards (2019-2024) Install Guide in the RGB Halo Kits Help Center on October 22, 2026. Follow the instructions supplied with your exact kit if hardware versions differ.
Controller and wiring guide · Ask installation support · Browse lighting guides
