Skip to content
This installation reference covers RGBW Interior Kit. Match the product, vehicle configuration and controller part number before starting.
Match your hardware: Use the part number and controller supplied with your kit. Any section marked Archive applies to older hardware; do not combine archived app or wiring instructions with the current controller instructions.
Part # K10
RGBW Fiber Optic Interior Ambient Lighting Kit
Installation
Step 1: Power your wire harness using any 12V positive and ground connection or use a cigarette lighter power adapter (red to red and black to black).
Step 2: Install lights in your desired area by securely pushing them into any gap or split in your interior. You may need a squeegee or credit card to help fit the lights in tight areas. It is important to note that lights only bend one way, so be sure to test and keep this in mind when installing. Run wires as neatly as possible for the best results. Wires can be tucked into cracks and crevices as needed.
Step 3: Each strip is cuttable as needed for the best fitment. It can be cut using common household scissors. The strips can be cut after or before any LED. If you cut on an LED and experience flickering, cut a little more off, and the lights should function as normal. Do not cut off the wire end. Please cut the end away from the wire.
Step 4: Power each strip directly to the wiring harness using the included extension wire and hide wires as best you can.
Step 5: Open the RGB Halo Kits app to control your lights and enjoy!
**Archive**
RGBW Bluetooth Setup
App name: Magic LED Light
Interior Accent Lighting – RGB Halo Kits
Source and installation help
Checked against RGBW Fiber Optic Interior Ambient Lighting Kit Install Guide in the RGB Halo Kits Help Center on October 22, 2026. Follow the instructions supplied with your exact kit if hardware versions differ.
Controller and wiring guide · Ask installation support · Browse lighting guides
