Skip to content
This installation reference covers Ford Mustang Multicolor DRL Boards (2024). Match the product, vehicle configuration and controller part number before starting.
Part # F18
Ford Mustang Multicolor Flow DRL Boards (2024+)
Step 1: Test your Product. This helps you check operation and confirm the wiring before permanent installation. See the wiring guide that comes with your product or visit our Wiring Guide. Flow Series Bluetooth Controller w/ DRL Smartswitch + Turn Signal - Install Guide Step 2: Remove your bumper to access headlights. Step 3: Open your headlights. (*Confirm the opening and resealing method for your exact housing before following the video below) Baking Method Cutting Method Step 4: Install your LED Product into your headlights.Step 5: Reseal your headlights (see video above) or click here for full guide.
Any third-party video in this article belong to their creators and are used by RGB Halo Kits for instructional purposes. We don't own these videos, and their accuracy isn't guaranteed. If you have concerns about the content, please don't hesitate to get in touch with us. U
Additional installation videos
These earlier demonstrations may show a different controller revision. Use the current kit-specific wiring instructions above for your supplied hardware.
Source and installation help
Checked against Ford Mustang Multicolor DRL Boards (2024) Install Guide in the RGB Halo Kits Help Center on October 22, 2026. Follow the instructions supplied with your exact kit if hardware versions differ.
Controller and wiring guide · Ask installation support · Browse lighting guides
