Skip to content
Important Note: Our controller and app were updated to our new app RGB Halo Kits + Hybrid LED Controller as of 05/24/24. If your order if on or after that date, please refer to our latest guide here. If your order is before that date, please scroll to bottom of page to see the archived wiring setup or contact us for more info.
Note: This Wiring Guide Covers most products we carry, however there are some products with slightly different wiring set ups or apps. For those products, please see the direct help center article on that product or reference the included guide with that product order.
RGBW or RGBWA LED STYLE WIRING GUIDE
Wiring FAQ
- Can I wire my lights to turn on/off automatically with a vehicle parking light or DRL?
Yes, you can wire the controller two ways:
1. (recommended) you can wire the controller straight to the battery or constant power source: this will allow you to control the lights at all times even if the car is off. Lights will have to be cut on/off manually via the app.
2. You can wire the controller to a DRL fuse or parking light. The wiring will allow the lights to cut on/off automatically with the DRL or parking lights on your vehicle; however, you will not be able to control the lights while the vehicle or DRL/parking light is off.
____________________________________________________________
Archives (Older Versions)
Used 11/01/2023-05/24/24
app: Banlanx
RGBWA= RGBW+ Amber Turn Signal
