Skip to content
This installation reference covers 2011-2014 Dodge Charger Flow Series DRL Boards (for SPEC-D Headlights). Match the product, vehicle configuration and controller part number before starting.
Part # F19
Dodge Charger Spec-D Multicolor Flow DRL Boards (2011-2014)
Install Guide
Step 1: Test your Product. This helps you check operation and confirm the wiring before permanent installation. See the wiring guide that comes with your product
Flow Series Bluetooth Controller w/ DRL SmartSwitch - Install Guide
Step 2: Remove your bumper to access headlights.
Step 3: Open your headlights. We recommend using the baking method on this set. (*Confirm the opening and resealing method for your exact housing before following the video below)
Step 4: Install your LED Product into your headlights.
Step 5: Reseal your headlights (see video above) or click here for full guide.
Step 6: If you haven't already, wire your LED Product onto your car using the included wiring guide.
Flow Series Bluetooth Controller w/ DRL SmartSwitch - Install Guide
The third-party video in this article belong to their creators and are used by RGB Halo Kits for instructional purposes. We don't own these videos, and their accuracy isn't guaranteed. If you have concerns about the content, please don't hesitate to get in touch with us. Users agree to these terms by using the videos.
Additional installation videos
These earlier demonstrations may show a different controller revision. Use the current kit-specific wiring instructions above for your supplied hardware.
Source and installation help
Checked against Dodge Charger Flow Series/Color Chasing DRL Boards (for 2011-2014 Spec-D Headlights) Install Guide in the RGB Halo Kits Help Center on October 22, 2026. Follow the instructions supplied with your exact kit if hardware versions differ.
Controller and wiring guide · Ask installation support · Browse lighting guides
