Skip to content
This installation reference covers 2013-2018 Mercedes CLA 250 Multicolor DRL. Match the product, vehicle configuration and controller part number before starting.
Product Link
Mercedes CLA 250 Multicolor Halo Kit (2013-2018)
Step 1: Test your Product. This ensures no manufacturing defects are in the LEDS, and that you understand how to properly wire your product. See the wiring guide that comes with your product or visit our general wiring guide page here.
Step 2: Remove your bumper to access headlights.
Step 3: Open your headlights. (*Confirm the opening and resealing method for your exact housing before following the video below)
Step 4: Install your LED Product into your headlights.
We are currently in the process of creating a video installation guide for this product.
How to Mount Halo Rings / Headlight Halos – RGB HALO KITS
In the meantime, if you need any assistance during the installation process, don't hesitate to reach out to us. We're here to help!
Step 5: Reseal your headlights (see video above) or click here for full guide.
Step 6: If you haven't already, wire your LED Product onto your car using the included wiring guide or see our wiring guide.
The third-party video in this article belongs to its creators and is used by RGB Halo Kits for instructional purposes. We don't own these videos, and their accuracy isn't guaranteed. If you have concerns about the content, please don't hesitate to get in touch with us. Users agree to these terms by using the videos.
Source and installation help
Checked against 2013-2018 Mercedes CLA 250 Multicolor Halo Install Guide in the RGB Halo Kits Help Center on October 22, 2026. Follow the instructions supplied with your exact kit if hardware versions differ.
Controller and wiring guide · Ask installation support · Browse lighting guides
