Skip to content
This installation reference covers 2014-2015 Chevrolet Camaro RS/SS RGBW DRL Boards. Match the product, vehicle configuration and controller part number before starting.
Chevrolet Camaro RS/SS Multicolor DRL Boards (2014-2015)
Install GuideStep 1: Test your Product. This helps you check operation and confirm the wiring before permanent installation. See the wiring guide that comes with your product.
Step 2: Remove your bumper to access headlights.
Step 3: Open your headlights. (*Confirm the opening and resealing method for your exact housing before following the video below)
Step 4: Install and Wire Your LED Product into Your Headlights
Follow our General DRL Installation Guide for instructions on properly installing your LED product.
For wiring instructions, visit our Help Center and search for the part number of your controller to find the corresponding wiring guide.
We are currently working on a product-specific video installation guide. In the meantime, if you have any questions or need assistance with installation or wiring, please don't hesitate to contact our support team. We're here to help!
Step 5: Reseal your headlights (see video above) or click here for full guide.
Additional installation videos
These earlier demonstrations may show a different controller revision. Use the current kit-specific wiring instructions above for your supplied hardware.
Source and installation help
Checked against Chevrolet Camaro RS/SS RGBW DRL Boards (2014-2015) Install Guide in the RGB Halo Kits Help Center on October 22, 2026. Follow the instructions supplied with your exact kit if hardware versions differ.
Controller and wiring guide · Ask installation support · Browse lighting guides
